SiteLighting.com: Architectural Outdoor Lighting Solutions featuring Gardco and Emco Luminaires and Poles

Outdoor Lighting Products and Information for the Professional Lighting Designer

PureForm P21 Specifications

General

Philips Gardco PureForm luminaires combine LED performance excellence and advanced Gardco LED thermal management technology with a distinct purity of style to provide outdoor area lighting that is both energy efficient and aesthetically pleasing. PureForm is defined by its high performance, sleek low profile design and rugged construction. The die cast aluminum housing mounts directly to a pole or wall, and has a maximum profile of just 3". All LED wattages utilize high performance Class 1 LED systems. The luminaire features a state of the art integral thermal control system to maximize LED performance and life, and to extend component life. The door frame is die cast aluminum. Luminaires are finished with a fade and abrasion resistant TGIC powdercoat. PureForm luminaires are available in a wide variety of mountings and arms.

Housing

The PureForm features a die cast aluminum housing, and mounts directly to a pole or wall. The low profile rounded form reduces the effective projected area of the luminaire significantly.

PureForm luminaires supplied with A1, A2 and A3 arms are provided with arms firmly attached to the main luminaire housing body. As a result, the luminaires provide the functionality, strength and installation ease of an integral arm luminaire.

Mast arm mount luminaires are provided with the mast arm mounting assembly firmly attached to the main luminaire housing body.

Luminaire Configuration Information

P21

Philips Gardco PureForm LED standard luminaire providing constant wattage and constant light output when power to the luminaire is energized.

P21-DIM

Philips Gardco PureForm LED luminaire provided with 0 -10V dimming for connection to a control system provided by others.

P21-MR50

Philips Gardco PureForm luminaires with motion response, providing a 50% power reduction on low and a commensurate reduction in light output. The power and light output reduction is accomplished utilizing the Philips DynaDimmer module, programmed for a constant 50% power. Power supplied by the motion
sensor connected to the override line on the DynaDimmer takes the luminaire to high setting, 100% power and light output, when motion is detected. The luminaire remains on high until no motion is detected for the motion sensor duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field
adjustable from 5 minutes up to 15 minutes. Thi s conf i gur a t ion i s no t av a i l abl e fo r us e wi th wa l l mount ed luminaires.

P21-MR50 is available in 120V through 277V input only to the luminaire. Motion sensors require single voltage 120V or 277V input.

The Area PIR motion sensor is the WattStopper EW-200-120-W (120V Input - MSA-120V) or the WattStopper EW-200-277-W (277V Input - MSA-277V.) One motion sensor per pole is required and is ordered separately. Area sensors require single voltage 120V or 277V input.

The area motion detector provides coverage equal to up to 6 times the sensor height above ground, 270° from the front-center of the sensor.

Motion response requires that the pole include an additional hand hole 15 feet above the pole base, normally oriented 180° to the standard hand hole. For Philips Gardco poles, order the pole with the Motion Sensor Mounting (MSM) option which includes the hand hole and a special hand hole cover plate for the sensor with a 1/2" NPT receptacle centered on the hand hole cover plate into which the motion sensor mounts. Once the motion sensor is connected to the hand hole cover plate, then wiring connections are completed in the pole. The plate (complete with motion sensor attached and wired) is then mounted to the hand hole. If poles are supplied by others, the customer
is responsible for providing suitable mounting accommodations for the motion sensor in the pole.

P21-APD

Philips Gardco PureForm LED luminaire with Automatic Profile Dimming. Luminaire is provided with a programmable LED Driver, programmed to go to 50% power, 50% light output two (2) hours prior to night time mid-point and remain at 50% for six (6) hours after night time mid-point. Mid-point is continuously recalculated by the programmable LED Driver based on the average mid-point of the last two full night cycles. Short duration cycles, and power interruptions are ignored and do not affect the determination of midpoint. P21-APD is available in 120V through 277V input only.

The P21-APD offers many of the advantages of a sophisticated control system, including an average energy savings of at least 33% versus constant wattage, constant light output systems, without the need for a control system.

P21-APD-MRO

Philips Gardco PureForm LED luminaire with Automatic Profile Dimming, with Motion Response Override. The P21- APD-MRO combines the benefits of both automatic profile dimming and motion response, using the Philips DynaDimmer module. The luminaire will dim to 50% power, 50% light output, per the dimming
profile shown for the P21-APD. If motion is detected during the time that the luminaire is operating at 50%, the luminaire returns to 100% power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field
adjustable from 5 minutes up to 15 minutes. This configuration is not available for use with wall mounted luminaires.

P21-APD-MRO is available in 120V through 277V input only to luminaire. The motion sensor requires either 120V or 277V input to the motion sensor.

The P21-APD-MRO has the same pole requirements and utilizes the same motion sensors as the P21-MR50. The motion sensor mounts and wires identically as well. The P21APD-MRO utilizes the identical dimming profile as shown for the P21-APD.

By combining the benefits of automatic profile dimming and motion response, the P21-APD-MRO assures maximum energy savings, and insures that adequate light is present if motion is detected.

Note: All motion sensors utilized consume 0.0 watts in the off state.

Luminaires with Integral Motion Sensor - P21-MRI:

Luminaires wi t h Mo t i on R e sp on s e an d an i n t e g r a l mo t i on s e n so r i n c l u d e a programmable LED driver and an integral motion sensor. The programmable LED driver is set to a constant 50%. When motion is detected, the luminaire goes to 100%. The luminaire remains on high until no motion is detected for the motion sensor duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes. Available with 120V through 277V (UNIV) only.

P21-MRI luminaires are provided with the WattStopper FS-305-L3W motion sensor, with a maximum recommended 20 ft. mounting height. The area coverage and range of the integral sensors make them most suitable for applications not requiring long range detection. For longer range detection applications, configurations with pole mounted motion sensors are recommended.

Luminaires with Integral Motion Sensor - P21-APD- MRI:

Luminaires with Automatic Profile Dimming and Motion Response Override combine the benefits of both automatic profile dimming and motion response. APD-MRI luminaires utilize a programmable LED driver. The luminaire will dim to 50% power, 50% light output, per the dimming profile shown for APD luminaires (see page 4). If motion is
detected during the time that the luminaire is operating at 50%, the luminaire goes to 100% power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes.

APD-MRI luminaires are available with 120V through 277V (UNIV) input voltages only.

APD-MRI luminaires use the identical motion sensor as MRI luminaires. See motion sensor details for P21-MRI.

LED Reliability

Predicted Luminaire Depreciation Data*
Ambient Temperature °C   Driver mA L70 Hours**
25°C   350mA 240,000
  530mA 180,000
40°C   350mA 225,000
  530mA 160,000

* Predicted performance derived from LED manufacturer's data and engineering design estimates, based on IESNA LM-80 methodology. Actual experience may vary due to field application conditions.
** L70 is the predicted time when LED performance depreciates to 70% of initial lumen output.

Thermal Management

The Philips Gardco PureForm LED provides die cast aluminum integral thermal radiation fins to provide the excellent thermal management so critical to long LED system life.

Optical Systems

The advanced LED optical systems provide IES Types II, III, IV and V distributions, as well as a Backlight Control optic. Special LEED corner cutoff optics are also available, both as LCR (right) and LCL (left.) All optical systems feature unitized lens optic construction.

Types 2, 3, 4, BLC and LCR/LCL optical systems utilize an innovative redirecting reflector system to complement the performance of the LED optic. The redirecting reflector system includes a black surrounding surface to minimize aperture brightness when viewed from the rear of the luminaire.

PureForm luminaires are provided standard without a glass lens, for maximized performance. A glass lens is available as an option, resulting in reduced performance. All PureForm luminaires provide full cutoff performance.

Full Cutoff Performance : Full cutoff performance means a luminaire distribution where zero candela intensity occurs at an angle at or above 90° above nadir . Additionally, the candela per 1000 lamp lumens does not numerically exceed 100 (10 percent) at a vertical angle of 80° above nadir. This applies to all lateral angles around the luminaire.

IP Rating

PureForm luminaires have a rating of IP66.

Vibration Resistance

PureForm carries a 3G vibration rating that conforms to standards set forth by ANSI C136.31. Testing includes vibration to 3G acceleration in three axes, all performed on the same luminaire.

Electrical

Luminaires are equipped with an LED driver that accepts 120V through 277V, or 347V through 480V, 50hz to 60hz, input. Driver output is based on the LED wattage selected. Component-to-component wiring within the luminaire will carry no more than 80% of rated current and is listed by UL for use at 600 VAC at 302°F / 150°C or higher. Plug disconnects are listed by UL for use at 600 VAC, 15A or higher. Power factor is not less than 90%. Luminaire consumes 0.0 watts in the off state. All motion sensors utilized consume 0.0 watts in the off state

Finish

Each standard color luminaire receives a textured, semi-gloss, fade and abrasion resistant, electrostatically applied, thermally cured TGIC (triglycidyl isocyanurate) polyester powdercoat finish in bronze (BRP), black (BLP), white (WP) or natural aluminum (NP). Units are thoroughly cleaned and provided with a chromate acid pretreatment. Optional RAL colors (OC) are available and refer to colors defined by a classic (4) digit RAL designation (ex. RAL6005). Consult factory for special colors (SC).

Labels

All luminaires bear UL or CUL (where applicable) Wet Location labels.

Warranty

Philips Gardco luminaires feature a 5 year limited warranty. Philips Gardco LED luminaires with LED arrays feature a 5 year limited warranty covering the LED arrays. LED Drivers also carry a 5 year limited warranty. Motion sensors are covered by warranty for 5 years by the motion sensor manufacturer. Polycarbonate lenses carry a 1 year warranty. See Warranty Information for complete details and exclusions.

Philips Gardco Lighting reserves the right to change materials or modify the design of its product without notification, as part of the company's continuing product improvement program.

Monday, September 15, 2014

Philips Gardco Lighting • 1611 Clovis Barker Road, San Marcos, TX 78666 • (512) 753-1000 • (800) 227-0758 • Fax: (512) 753-7855
© Koninklijke Philips N.V., 2013. All rights reserved.